|
|
Cleaning and Floor Care Products
Shopping Cart coming in 2010, until then please browse our catalogue and
click Place An Order for instructions.
|
Floor Finish 820
Floor Finish 820 contains a select blend of acrylic polymers and waxes that form a super hard finish that can be easily repaired through buffing or burnishing to give an outstanding shine. Floor Finish 820 demonstrates excellent resistance to wear, traffic and to damage from abrasive equipment such as chairs, carts and dollies. Non-yellowing, exceeds UL standards for slip resistance. Allows for extended stripping cycles, thus reducing labor and material costs.
Application: Apply with a quality finishing mop or applicator. For full details read product label.
pH: 8.5 +/- 0.5
Appearance: Milky white liquid Solids: 20%
WHMIS Classification: Class D2B
| 4L (PRF 820-04) |
|
$26.90 |
|
|
|
| 20l (PRF 820-20) |
|
$127.35 |
|
|
|
Floor Finish 920
Floor Finish 920 is a UHS grade floor finish for professional use. Floor Finish 920 provides a super hard finish with a high initial shine that is durable, scuff resistant and "pops" to a deep shine when burnished.
Application: Apply with a quality finishing mop or applicator. For full details read product label.
pH: 8.5 +/- 0.5
Appearance: Milky white liquid Solids: 20%
WHMIS Classification: Class D2B
| 4L (PRF 920-04) |
|
$27.75 |
|
|
|
| 20L (PRF 920-20) |
|
$132.34 |
|
|
|
Floor Finish 1020
Floor Finish 1020 is a sealer finish, not requiring the initial application of sealer on floors that have been recently stripped. Floor Finish 1020 provides a hard finish with a high initial shine and responds will to buffing.
Application: Apply with a quality finishing mop or applicator. For full details read product label.
pH: 8.5 +/- 0.5
Appearance: Milky white liquid Solids: 20%
WHMIS Classification: Class D2B
| 20L (PRF 1020-20) |
|
$132.34 |
|
|
|
Floor Sealer
Floor Sealer is a semi-permanent clear undercoating for Floor Finish 820 and 920 or for use as a sealer/finish on non-resilient floors such as terrazzo, slate, marble and other stone floors.
Application: Apply with a quality finishing mop or applicator.
pH: 8.5 +/- 0.5
Appearance: Milky white liquid Solids: 14%
WHMIS Classification: Class D2B
Floor Stripper Sure Strip 640
A heavy duty floor stripper for use on floors that have excessive build up of finish that will not respond to general purpose strippers.
Dilution: For routine stripping, dilute with 3-6 parts water.
pH: 13.0 +/- 0.5
Appearance: Clear red liquid, low odor
WHMIS Classification: Class E
Neutraliser
Neutraliser is for the rinsing of floors that have been stripped. Neutraliser contains colatile acetic acid and a melting agent that allows it to neutralise any alkalinity on the floor and then dry to give a floor ready to accept finish. Floor must be pre-rinsed before using Neutraliser.
Dilution: 1:40
Application: Apply with a mop, as required.
pH: 1.0 -1.5
Appearance: Clear red aqueous solution
WHMIS Classification: Class E Corrosive
REFURB Spray Buff
Refurb is a spray cleaner/restorers for use on Floor Finish 820, 920 and 1020. Refurb will easily remove black heel marks and scuffs without damaging the finish, and restores floors to their best possibly appearance.
Dilution: For spray buffing use as is, for burnishing dilute 1:4 with water.
Application: Dust and/or damp mop floor, apply to floor as a fine spray and buff or burnish to a nice gloss.
pH: 8.5 +/- 0.5
Appearance: Milky bluish liquid
WHMIS Classification: Class D2B
|
|
